Auto Manual of VW Passat B5

VW Passat
The maintenance instruction
1. Maintenance service
2. Engines
3. Cooling system
4. Fuel system
- 5. Engine management
   5.2. Work of a control system as the engine
   5.3. Check of system of injection of fuel
   5.4. Gauges and executive mechanisms of a control system of the engine
    5.5. Ignition system
   - 5.6. A fuel highway and fuel atomizers
      5.6.1. Check of fuel atomizers (4-htsilindrovyj the petrol engine)
      5.6.2. Check of giving of pressure to fuel atomizers
      5.6.3. Check of a torch of dispersion and tightness of a fuel atomizer
   5.7. The basic malfunctions of a control system of the engine
6. An exhaust system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. A body
12. Heating, ventilation
13. An electric equipment

5.6.3. Check of a torch of dispersion and tightness of a fuel atomizer

THE GENERAL DATA

Engines 1,6-I AHL

PERFORMANCE ORDER

1. Disconnect a four-contact electric socket from the gauge of temperature of a cooling liquid which is located on the thermostat case.

2. Close contacts 1 and 3 gauges resistance 15 Ohm.

3. Remove a fuel highway together with fuel atomizers, without disconnecting from it fuel hoses.

4. Insert fuel atomizers into measuring vessels, for example VAG1602.

5. Ask the assistant to include a starter for some seconds. at starter work fuel atomizers should spray fuel. Check up a torch of dispersion of fuel which should have the cone-shaped form and to be identical at all atomizers.

6. Switch off ignition and check up tightness of fuel atomizers. Within 1 minute from fuel atomizers should flow out no more than two drops of fuel.

7. Establish a fuel highway together with fuel atomizers on the engine. Before installation check up a condition and grease sealing rings of fuel atomizers.

8. Connect an electric socket to the gauge of temperature of a cooling liquid.

Engines 1,8-I and 1,6-I ADP

PERFORMANCE ORDER

1. Connect a much contact electric socket to the block of management of the ignition coil.

2. Establish the top casing of the engine.