Auto Manual of VW Passat B5

9.2. A safety pillow

THE GENERAL DATA

Разблокирование a steering column


Clearing of a pillow of safety on a steering wheel with three spokes

1 – a steering wheel, 3 – a fixing clip, 10 – a clamp

Clearing of a pillow of safety on a steering wheel with four spokes

1 – a steering wheel, 3 – a fixing clip, 10 – a clamp

Removal

PERFORMANCE ORDER

1. Switch off ignition and remove a wire of weight from the accumulator. 2. Isolate a wire of weight to avoid its casual connection to the accumulator. 3. Establish forward wheels of the car for movement directly forward. Thus the steering wheel should be established in average position. 4. Turn a steering wheel on 90 counter-clockwise. 5. Unblock a steering column, fig. of Razblokirovanie of a steering column see. 6. Move a steering wheel against the stop on itself and downwards. 7. Fix steering wheel position. 8. Release a safety pillow for what from a steering wheel underside insert an edge of a screw-driver in length of 175 mm into a steering wheel aperture, Clearing of a pillow of safety fig. see a steering wheel with three spokes and fig. Clearing of a pillow of safety on a steering wheel with four spokes. 9. Moving the screw-driver handle upwards, a screw-driver edge press downwards a clamp 10 and release fixing clip of 3 pillows of safety. Move a pillow of safety from a steering wheel. 10. Turn a steering wheel on 180 clockwise and similarly release a pillow of safety from the second fixing clip. 11. Establish a steering wheel in average position. Thus wheels will be established for rectilinear movement. 12. Disconnect an one-contact electric socket of a pillow of safety. 13. Remove a safety pillow. The prevention Do not change steering wheel position.

Installation

PERFORMANCE ORDER

1. Move a safety pillow to a steering wheel and connect an one-contact socket of a pillow of safety. 2. Establish a safety pillow on a steering wheel so that fixing clips were established opposite to apertures. Being careful, press a pillow of safety before its accurate fixing. 3. Connect a weight wire to the accumulator, thus in car salon there should not be people.