Auto Manual of VW Passat B5

VW Passat
The maintenance instruction
1. Maintenance service
2. Engines
3. Cooling system
4. Fuel system
5. Engine management
6. An exhaust system
- 7. Transmission
    7.1.2. A coupling disk
   - 7.2. A mechanical transmission
      7.2.2. Transmission removal
      7.2.3. Transmission installation
      7.2.4. Transmission repair
    7.3. Automatic transmissions
8. A running gear
9. A steering
10. Brake system
11. A body
12. Heating, ventilation
13. An electric equipment


7.2. A mechanical transmission

7.2.1. The general information

The transmission will transform a twisting moment transferred from the engine on size and a direction. It is necessary for maintenance of optimum speed and passableness of the car, and also for the most economic work of the engine and movement of the car by a backing. Besides, the transmission separates the engine and transmission during a stop and parking of the car and at its movement by inertia with working engine.

Transmission details are placed in картере which is screwed by bolts on a back part of the engine.

The twisting moment from the engine through coupling is transferred to an entrance shaft of a transmission. A target shaft the transmission transfers a twisting moment through differential to power shafts. Transfer inclusion is carried out by moving sliding муфты синхронизато ра therefore the gear wheel rigidly incorporates to transmission shaft.

The transmission represents very difficult unit and its repair it is necessary to make in специализирован ache a workshop, therefore in the present management removal and transmission installation are resulted only.