1. Establish the car on the lift in horizontal position. |
2. Remove the bottom mudguard of the engine. |
|
3. Using key VW 3357, unscrew маслоналивную a stopper from a transmission which is located before the left power shaft. |
4. Check up oil level. Oil level correct when it is on the bottom edge of a carving aperture. |
5. If necessary add oil through маслоналивное an aperture. |
6. Screw up a stopper маслоналивного apertures and tighten its moment of 25 Nanometers.
The prevention Carter of a transmission can be made of an aluminium or magnesian alloy. If the new carving stopper маслоналивного apertures it should be picked up for number for a corresponding transmission as stoppers have a various covering is established. If to use an inappropriate stopper there can be a contact corrosion.
|