| 1. Establish under the fuel filter the corresponding container. |
| 2. For maintenance of receipt of air in the power supply system, ослабьте a collar (), also unscrew a bolt () hose fastenings, fig. the Arrangement of collars () and a fastening bolt () fuel hoses see. |
3. Unscrew in the top part of the filter a bolt for removal of air and ослабьте in the bottom part a stopper for plum of a liquid and merge a liquid (about 100 sm3) before occurrence of pure fuel. For purposeful liquid plum, it is possible to dress a hose on a stopper.
The prevention Do not merge all contents of the fuel filter.
|
4. Screw up in the top part of the filter a bolt for removal of air and in the bottom part a stopper.
The prevention After plum of water from the fuel filter removal of air from fuel system is not required.
|
| 5. For closing of receipt of air in the power supply system, tighten a collar (), and screw in a bolt () hose fastenings to an arm, fig. the Arrangement of collars () and a fastening bolt () fuel hoses see. |
| 6. Removal of air from fuel system will occur automatically, after engine start. After several pressing an accelerator pedal, fuel without vials should flow on the transparent pipeline to the fuel pump of a high pressure. |
| 7. Visually check up tightness of fuel system, in particular, in junctions of the fuel filter. |
