1.2.1. Weekly checks and service in a way
The prevention Before connection of the external accumulator make sure that ignition is switched off.
Make sure that all electric equipment (headlights, heating devices, screen wipers etc.) are switched off.
Take into consideration all special precautions ordered on the accumulator.
Cars should not concern each other.
Make sure that the gear change lever is in neutral position (or PARK in case of an automatic transmission).
| PERFORMANCE ORDER |
|
1. Connect one end of a red wire of the big section to the positive plug of the discharged accumulator. |
|
2. Connect other end of a red wire to the positive plug of the external accumulator. |
|
3. Connect one end of a black wire of the big section to the negative plug of the external accumulator. |
|
4. Connect other end of a black wire of the big section to the power unit or an element of a body of the started car far away from the accumulator. |
| 5. Make sure that wires do not contact with вентилято rum, приводными belts or other rotating parts of the car. |
| 6. Start the engine, using an external source (thus the car-source engine should idle). |
| 7. After start of the engine of the car with the discharged accumulator disconnect wires in return sequence. |
|
|
