|
1. Check up density of connection of clips of the accumulator () and integrity of isolation of wires (). |
|
2. Using a metal brush, clear plugs of the accumulator and the plug of wires.
If necessary, wash out plugs a soda solution in warm water. Be careful, that the soda solution has not got to accumulator banks. |
3. Check up that nuts of a fixing element of the accumulator are reliably tightened. Do not draw a nut as the accumulator case can be damaged. |
4. Before connection of clips of the accumulator grease plugs безкислотным with vaseline and anticorrosive компаундом. |
5. Periodically (1 time a quarter) check up degree заряженности the storage battery for what measure electrolit density in banks of the storage battery. |