VW Passat
The maintenance instruction
1. Maintenance service
2. Engines
3. Cooling system
4. Fuel system
5. Engine management
6. An exhaust system
7. Transmission
8. A running gear
9. A steering
- 10. Brake system
10.2. The general information
10.3. Systems ABS/EBV/EDS/ASR/ESP
10.4. Check of the vacuum amplifier of brakes
10.5. Replacement of lobbies brake колодок
10.6. Replacement back brake колодок
10.7. Check of a brake disk
10.8. A brake disk
10.9. Prorolling of hydraulic brake system
10.10. Brake pipelines and hoses
10.11. The stoplight switch
10.12. The lever of a manual brake
10.13. Adjustment of a manual brake
10.14. A cable of a manual brake
10.15. The basic malfunctions of brakes
11. A body
12. Heating, ventilation
13. An electric equipment
|
Arrangement of the switch of a stoplight
|
|
1 – the switch of a stoplight,
2 – counternut М12х1,5,
3 – a pedal of a brake, And = 0,1–0,5 mm |
Removal
| PERFORMANCE ORDER |
| 1. Remove a carpet covering in deepening for feet of the driver. |
| 2. Disconnect an electric socket from the switch of stoplights (fig. the Arrangement of the switch of a stoplight see). |
| 3. Ослабьте a counternut also unscrew the switch of a stoplight from an arm of a pedal of a brake. Keep the spring ring located between a counternut and an arm of a pedal of a brake. |
|
Installation
| PERFORMANCE ORDER |
| 1. Screw in the stoplight switch in an arm of a pedal of a brake so that the distance between a pusher of the switch and a brake pedal made 0,1–0,5 mm. In this position of the switch tighten a counternut the moment of 5 Nanometers. At installation of the switch of a stoplight the brake pedal should be in a starting position. |
| 2. Connect an electric socket to the stoplight switch. |
| 3. Check up work of the switch of stoplights. Even by insignificant pressing a pedal of a brake stoplights should light up. |
| 4. Establish into place a carpet covering in deepening for feet of the driver. |
|
|
|
