Auto Manual of VW Passat B5 |
VW Passat The maintenance instruction 1. Maintenance service 2. Engines 3. Cooling system 4. Fuel system 5. Engine management 6. An exhaust system 7. Transmission 8. A running gear 9. A steering - 10. Brake system 10.2. The general information 10.3. Systems ABS/EBV/EDS/ASR/ESP 10.4. Check of the vacuum amplifier of brakes 10.5. Replacement of lobbies brake колодок 10.6. Replacement back brake колодок 10.7. Check of a brake disk 10.8. A brake disk 10.9. Prorolling of hydraulic brake system - 10.10. Brake pipelines and hoses 10.10.1. Replacement of a brake hose 10.11. The stoplight switch 10.12. The lever of a manual brake 10.13. Adjustment of a manual brake 10.14. A cable of a manual brake 10.15. The basic malfunctions of brakes 11. A body 12. Heating, ventilation 13. An electric equipment |
10.10. Brake pipelines and hoses
Brake tubes are applied to transfer of a brake liquid from the main brake cylinder to wheel brake cylinders. Connections of tubes with brake cylinders and the distributor ными are made by devices конусными муфтами. The ends of tubes are pressed out and have the cone-shaped form for the corresponding size конусных carving apertures in brake cylinders or switching centres. Before обжатием the ends of tubes the lock nut which after ввинчивания a cone-shaped surface in конусное the basis of a carving aperture presses and герметизирует a tube is put on them. Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of a brake liquid at removal of working brake cylinders clips for пережатия brake hoses are used. At installation of a new brake tube or a brake hose be convinced that they are densely fixed in arms and are on sufficient distance from moving or heating up details. Upon termination of installation check up level of a brake liquid in the main brake cylinder and add it if necessary. Remove air from brake system and cautiously check up work of brakes before beginning car operation. |
|