Auto Manual of VW Passat B5

Rear-view mirrors

THE GENERAL DATA

Installation of mirrors

Rear-view mirrors should be established before the trip beginning so that at any moment it was possible to see road conditions behind the car.

Противослепящее an internal mirror

In a mirror substantive provision рычажок from below mirrors should be directed forward.

For maintenance противослепящего effect it is necessary to move рычажок back.

Installation of external mirrors from within without the electric drive is carried out manually by means of the buttons located in an upholstery of doors.

Installation of external mirrors with the electric drive is carried out by pressing edges of the button And, the door of the driver located in an upholstery. By pressing one of lateral buttons L and R switching of installation from the left external mirror to right and on the contrary is carried out.

At installation of the left external mirror the right mirror synchronously moves. Independent installation of the right external mirror therefore in usual conditions is not necessary. If you wish to be switched to the right mirror in this case, this mirror can be established independently.

At malfunction of the electric drive of installation of mirrors, about it the blinking of illumination of switches электростеклоподъемников in all doors within approximately 15 seconds signals after inclusion of ignition. You should address in the service enterprise a Volkswagen.

At electric drive refusal it is possible to make installation of external mirrors manually by pressing on edges of a surface of a mirror.

Memory for external mirrors

Cars with memory for a seat of the driver have also memory for external mirrors.

Any established position of external mirrors automatically is brought in a memory at storing of adjustments of a seat of the driver.

Before it is necessary to adjust position of a seat of the driver. Then mirrors according to installation of a driver's seat are established.

Automatic installation of the right external mirror at movement by a backing

At inclusion of transfer of a backing the right external mirror automatically occupies in advance established position if such position has been earlier established.

Thanks to it at a parking visibility right бордюрного a stone is provided. The mirror comes back in normal position as soon as backing transfer is switched off.

In advance established position of the right external mirror for movement by a backing can be changed and brought according to specific features in memory.

Instructions on application convex and асферических external rear-view mirrors

Convex rear-view mirrors increase a review field, thus subjects are represented in a reduced form. For this reason these mirrors only rather conditionally suit an estimation of distance to moving after cars.

Asferichesky mirrors have a smooth surface of different curvature. These wide-angle mirrors increase a field of the review even more, than convex mirrors. They also only rather ограниченно are suitable for an estimation of distance to moving after cars.

Heating of mirrors

Heating of external mirrors with the electric drive is carried out, while heating of back glass is included. Ignition should be included.

Folding of external mirrors

External mirrors of the car can be combined. For this purpose it is necessary to press the mirror case to a car body.

Before passage of an automatic sink external mirrors should be pressed to a body in order to avoid their damage.

Mirrors with an electric drive of folding of mirrors

Folding of mirrors is recommended, for example, for their protection against damage at a parking of the car or at movement in the constrained conditions.

By simultaneous pressing and keeping in the pressed position of both buttons L and R both external mirrors nestle on a body.

If these both buttons L and R again to press, mirrors again come back in a starting position.

If position of the case of an external mirror owing to power influence has changed (for example, at a contact of other car at maneuvering), it is necessary to press both mirrors against the stop to a body by means of the electric drive. In no event it is impossible to redeem position of a mirror by a hand as it will negatively affect work of the mechanism of installation of a mirror.

If there is a danger of damage of cases of external mirrors, it is possible at pressing of mirrors to a body and their returning in a starting position process to interrupt. For this purpose follows both buttons L and R immediately to lower.