Elements of fastening of the lock of a cowl
1 – the lock of a cowl,
2 – дорн,
3 – the lever of an unblocking of the lock of a cowl,
4 – a clip, |
5 – an edge of a screw-driver,
6 – самоконтрящийся a bolt, 12 Nanometers,
7 – the microswitch,
8 – a cable of opening of the lock of a cowl |
The prevention Before removal of the lever 3 it is necessary to remove a radiator lattice preliminary.
The screw-driver 5 is used for a release of ears in a back part of the lever of blocking of the lock of a cowl before lever removal.
Bolts 6 are used for fastening of the lock of a cowl. At installation it is necessary to use new bolts.
The microswitch 7 is established at presence on the car of anticreeping system.
Adjustment of position of the lock of opening of a cowl is carried out by its moving at the expense of the increased apertures under bolts of fastening of a cowl. Before adjustment of position of the lock of a cowl ослабьте bolts of fastening of the lock.
Removal
PERFORMANCE ORDER |
1. Using a screw-driver edge, in a back part of the lever of an unblocking of the lock of a cowl, unclench short moustaches and remove the lever. |
2. Unscrew two самоконтрящихся a bolt, крепящие the cowl lock. |
3. Disconnect a cable of opening of the lock of a cowl from the lock. |
4. Disconnect an electric socket from the microswitch of anticreeping system. |
5. Remove the lock of a cowl from the car. |
|
|