Auto Manual of VW Passat B5

VW Passat
The maintenance instruction
1. Maintenance service
2. Engines
3. Cooling system
4. Fuel system
5. Engine management
6. An exhaust system
7. Transmission
8. A running gear
9. A steering
10. Brake system
- 11. A body
   11.2. Care of a body
   11.3. Care of an upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of strong damages of a body
    11.6. The forward cross-section panel
   11.7. A forward bumper
   11.8. Removal of the lever of blocking of a cowl
   11.9. Adjustment of a lateral directing arm of a bumper
   11.10. A back bumper
   11.11. A forward wing
   11.12. Facing of a niche of a forward wheel
   11.13. An air inlet lattice
    11.14. A cowl
   11.15. A radiator lattice
    11.16. A cable of opening of the lock of a cowl
   11.17. The cowl lock
   11.18. Internal furnish of a door
   11.19. Differences at removal of an upholstery of the right forward door
   11.20. The block of management of door mechanisms
   11.21. Door consolidation
   11.22. Lateral furnish of a luggage space of models the Sedan
   11.23. Lateral furnish of a luggage space of models the Versatile person
   11.24. Back furnish of a luggage space on models the Sedan
   11.25. An upholstery of a cover of a luggage carrier
   11.26. An upholstery of a door of a luggage carrier
   11.27. A covering of a floor of a luggage space on models the Versatile person
   11.28. A luggage carrier cover
    11.29. The luggage carrier lock
   11.30. Adjustment of position of a cover of a luggage carrier / a back door
    11.31. The lock of a back door on models the Versatile person
   11.32. A forward door
   11.33. The cylinder of the lock of a forward door
   11.34. The external handle of opening of a door
   11.35. The door lock
   11.36. Manual lowering of glass of a door
   11.37. Door glass
   11.38. A door arm
   11.39. An internal rear-view mirror
   11.40. The central console
   11.41. A forward ashtray
   11.42. A back ashtray
   11.43. A decorative overlay of the lever (an automatic transmission)
   11.44. Decorative overlays under a radio receiver
   11.45. The bottom furnish of the panel of devices from outside the driver
   11.46. A ware box
   11.47. An internal decorative overlay of an external rear-view mirror
   11.48. The ceiling handle
   11.49. Protivosolnechnye peaks
   11.50. Overlays of thresholds
   11.51. Wind and back has flown down
   11.52. Sitting lobbies
   11.53. A headrest
   11.54. Lateral pillows of safety
   11.55. Back sitting
   11.56. The left back of back sitting
   11.57. A carpet covering
   11.58. Elements of furnish of an interior
   11.59. An external mirror of a back kind/glass of a mirror
   11.60. The case of an external mirror
   11.61. The Protection/bordjurnaja a roof lath
   11.62. A lateral overlay of a body
   11.63. Replacement of rubber tapes of brushes of screen wipers
   11.64. Nozzles of washers of a windscreen
   11.65. Screen wiper levers
12. Heating, ventilation
13. An electric equipment

11.28. A luggage carrier cover

THE GENERAL DATA

Elements of fastening of a cover of a luggage carrier

1 – a cover of a luggage carrier,
2 – an upholstery of a cover of a luggage carrier,
3 – the buffer,
4 – nuts, 25 Nanometers,
5 – the hinge of a cover of a luggage carrier,
6 – a bolt, 20 Nanometers,
7 – the rubber buffer, 8 – a pneumatic support,
9 – a plate of the lock,
10 – a nut, 7 Nanometers,
11 – electroconducting,
12 – a casing of the hinge,
13 – the rubber buffer

Removal

PERFORMANCE ORDER

1. Remove an upholstery of a cover of a luggage carrier.

2. Disconnect electric sockets in a luggage carrier cover.

3. Adhere to electroconducting a thin long cord and take an electricity cable ку from a luggage carrier cover. Untie a cord and leave it in a luggage carrier cover. Further the cord is required for an electroconducting tightening in a luggage carrier cover.

4. Using a marker or a pencil, note an arrangement of loops of hinges on a luggage carrier cover.

5. Ask the assistant to support a luggage carrier cover in open position and remove a pneumatic emphasis of a cover of a luggage carrier.

6. Unscrew fastening of hinges from a cover of a luggage carrier and uncover a luggage carrier the car.

Installation

PERFORMANCE ORDER

1. Establish a luggage carrier cover on the car and according to earlier made marks screw on a cover of a luggage carrier hinges.

2. Check up and by means of hinges adjust backlashes between a cover of a luggage carrier and other elements of a body. Tighten nuts of fastening of hinges to a cover of a luggage carrier the moment of 20 Nanometers.

3. Adhere electroconducting to a cord and for a cord involve electroconducting in a luggage carrier cover. Untie a cord and connect an electric socket to a luggage carrier cover.

4. Fix a pneumatic emphasis on a luggage carrier cover.

5. A water stream check up, whether the luggage carrier proceeds:
– One person with a small lamp should be in a luggage carrier,
– The second person should direct a water stream on a luggage carrier.

6. In case of detection of course of a luggage carrier follows by means of hinges and a plate of the lock to lower a luggage carrier cover a little.

7. If on luggage carrier consolidation there are cracks, replace it.

8. For consolidation protection put on it a thin layer of special means.

9. Establish an upholstery of a cover of a luggage carrier.

10. During car movement, check up, whether there are fluctuations of a cover of a luggage carrier.