Auto Manual of VW Passat B5



VW Passat
- The maintenance instruction
   Keys
   Doors, the central blocking of locks
   Luggage carrier cover (a back door of the car the Versatile person)
   Remote radio management of locks
   Электростеклоподъемники
   Rear-view mirrors
   Seat belts
   System of inflatable pillows of safety
   Headrests
    Forward seats
   Memory for a driver's seat
   Storing of adjustments of a seat and external mirrors for advance
   Call of adjustments of a seat and external mirrors for movement by a forward course
   Back many-placed seat (Sedan)
   Back many-placed seat (Versatile person)
   Cover for lengthy luggage
   Armrests
   Luggage space
   Shelf of a luggage space (versatile person)
   Lay brake
   Mechanical transmission
    4-step automatic transmission
   - 5-step секвентальная an automatic transmission
      Selector positions
   Adjustable steering column
   The ignition lock
   Engine start-up
   Engine stop
   Control devices
   Control lamps
   System of the automatic control with the multipurpose index
   Vital importance infringements (red pictogrammes)
   Infringements of minor importance (yellow pictogrammes)
   Navigating system
   Switches and switches
   The podrulevoj switch of indexes of turns and light of headlights
   Cruise-control
   Screen wipers and стеклоомыватели
   Heating and ventilation
   Nozzles of giving of air
   Climatic installation
   Nozzles of giving of air
    Climatic installation "Klimatronik"
   The podemno-sdvizhnaja panel of the hatch of a roof
   Internal illumination
   Box for things
   Plug receptacles in a luggage space
   How economically to operate the car
   Braking
   Antiblocking system of brakes
   Protivobuksovochnaja system (the reduced twisting moment of the engine, ASR)
   Protivobuksovochnaja system with притормаживанием wheels (EDS)
   Electronic system of stabilisation (ESP)
   The steering amplifier
   Fuel (petrol engines)
   Fuel (diesel engines)
    Motor compartment
   Bases of safe operation of the car
   Specifications
   Bases of safe operation of the car
   Specifications
1. Maintenance service
2. Engines
3. Cooling system
4. Fuel system
5. Engine management
6. An exhaust system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. A body
12. Heating, ventilation
13. An electric equipment



49e3918c

Selector positions
THE GENERAL DATA


On a combination of devices the display on which it is shown is located, in what position there is a selector.
The prevention

Never but time of movement do not translate the selector in a position "R" or "Р". The Transmission can fail.


Р – Lay blocking.

Driving wheels are mechanically blocked.

It is necessary to translate the selector on this position only at completely stopped car. Before inclusion and position deenergizing "Р" it is necessary to press the blocking button on the selector handle. Before deenergizing of this position at the included ignition in addition it is necessary to press a brake pedal.

R – the Backing.

The backing position should join only at completely stopped car and at engine idling. Before transition to a position "R" from positions "Р" or "N" it is necessary to press a brake pedal and to press on the blocking button in the selector handle.

In a position "R" at the included ignition backing lanterns burn.

N – the Neutral position (an idling position).

At a conclusion of the selector from a position "N" at speed of movement to 5 km/h, and also at the motionless car and the included ignition it is necessary to press a brake pedal and to press on the blocking button on the selector handle. However it is not obligatory to press the blocking button when from a position "N" the selector is translated in a position "D".

D – Long advance.

Five transfers are switched with low to higher and on the contrary automatically depending on loading on the engine and from speed of movement.

Under certain conditions movements expediently temporarily to use one of mentioned below positions.

4 – the Position for "hilly" sites of road.

Such position of the selector is recommended when in certain traffic conditions at position of the selector in a position "D" there is a frequent switching to 4th on 5th transfer and on the contrary.

For selector transfer in this position it is necessary to press the blocking button in the selector handle. Depending on loading 1st, 2nd 3rd and 4th transfers are automatically switched to the engine and speeds of movement upwards and downwards. 5th transfer is blocked. Thanks to it the brake effect of the engine also increases at a fuel stopping delivery.

3 – the Position for mountain sites of road.

This position is recommended for long liftings and descents. 2nd are automatically switched upwards and downwards 1st, and 3rd transfers depending on loading to the engine and speeds of movement. 4th and 5th transfers remain blocked to avoid unnecessary switchings on the higher transfers. Thus efficiency of braking by the engine also raises.

2 – the Position for mountain sites of road with the big biases.

The choice of this position is recommended at driving on steep slopes and descents. At inclusion of this position it is necessary to press the blocking button on the selector handle. The car moves only on 1st or 2nd transfers. 3rd, 4th and 5th transfers are blocked to avoid unnecessary switching on the higher transfers. The greatest possible effect of braking is thus reached by the engine.

Cruise the control in a position "2" selectors cannot be used.

At manual switching on decreasing it is possible to pass to positions "4", 3 "and" 2 "switching on lower transfers automatically occurs only when after switching as much as possible admissible frequency of rotation of the engine will not be exceeded.

The device of compulsory anticipatory switching on lower transfer ("kik-daun")

This device provides maximum on the given traffic conditions car acceleration. As soon as pressure upon an accelerator pedal will exceed certain threshold value depending on frequency of rotation of the engine and speed of movement there is a switching on one of lower transfers. Return switching on the nearest higher transfer will follow only when as much as possible admissible value of frequency of rotation of a cranked shaft will be reached.


The prevention

Keep in mind that on slippery road driving wheels at compulsory anticipatory switching on lower transfer can start to revolve.



Recommendations for choice positions

Engine start-up


The engine can be started only at position of the selector of management in positions "N" or "Р".

Choice of a position for movement

Before selector transfer in one of positions at the motionless car and the working engine it is necessary to press a brake pedal always.

At a position choice at the motionless car it is impossible to press an accelerator pedal.

If during movement of the car the selector has been casually established in a position "N", it is necessary before lever transfer in any position of a forward course to clean a foot from a pedal of an accelerator and to wait engine idling.


The prevention

At the working engine it is necessary at position of the selector in any of movement positions to keep the car by means of a foot brake as even at single turns of the engine twisting moment transfer on wheels completely does not interrupt – автомобипь "creeps".

If at the motionless car one of movement positions is chosen, it is impossible to press uncontrolledly in no event on an accelerator pedal (including to increase giving of fuel by a hand from a motor compartment). The car immediately will start to move – and it can occur under certain circumstances even then when a lay brake will tighten.

Before to make any actions with working engine, it is necessary to establish the selector in a position "Р" and to tighten a lay brake.


Трогание from a place

Choose one of a movement position (R, D, 4, 3, 2). Wait, there will be no yet a transfer inclusion in a transmission, and the capacity stream will reach driving wheels (weak jerk) Only is thus felt then press an accelerator pedal.

Stop

At a short-term stop, for example, before a traffic light, there is no necessity to pass to a position "N". It is Quite enough to keep the car by means of a brake. The engine, however, should work only on single turns.

Parking

On road with a bias it is necessary to tighten reliably at first lay a brake, and then to put the selector in a position of lay blocking. Thanks to such order of operations, the blocking mechanism will not be too strongly loaded and subsequently it will be possible to deduce the selector from this position easily.

Towage for the purpose of engine start

Towage or pushing of the car with an automatic transmission for the purpose of engine start never can lead to engine start-up.